Bora Kala

Bora Kala bed by Pardo is the perfect solution for nursing homes, retirement homes and even private homes thanks to its stylish design, optimized movements and the solutions it...

Bora Kala
Cardiac chair position
Minimum height
Telescopic side rails
Extendable bed base
Under bed light

Tab verticales

Technical information

Bora Kala bed is the perfect solution for nursing homes, retirement homes and even private homes thanks to its stylish design, optimized movements and the solutions it provides.

Bora Kala bed decreases the fall risk and its often serious consequences thanks to its lowest height, which significantly increases overnight safety, especially for active patients.

Characteristics

The bed is made of a steel structure finished in a high quality pure epoxy-polyester coating, RAL 9006, resistant to chemical and mechanical agents.
Antibacterial coating tested according to ISO 22196:2011.
Fully electric powered bed fitted with a double compass lifting system and driven by linear actuators (IP66 protection level).
Bed base divided into 4 sections, two of them electrically adjustable and one of them cushioned.
Bed base made of fireproof HPL.
Tool-free easily removable sections ensure an easy cleaning of the bed base.
The bed is equipped with three two-sided areas for attaching and anchoring belts or segufix-type fastening systems.
Four brackets for anchoring lifting poles and IV pole accessories, placed on the eache corner of the headboard.
Telescopic side rails made of a combination of solid wood and aluminium, side rails are fitted on both bed sides and cover the entire bed length.
Four side rails, constructed in pairs, backrest and legrest, covering the entire bed surface.
Side rails with three safety levels (Without guards, partial guards and full guards).
Backlit wirred patient-nurse control, for easier operation when the bedroom lights are switched off.
The wired control has the basic comfort functions and the therapeutic controls, which can be activated by means of a built-in locking key.
The lifting motors are programmed to lock the bed at three different heights for an easier patient transfer, standing upright and lying down.
Excellent crane clearance, independent of the bed base height.
Bora bed includes a double autoregression system of the beds when these are raised to avoid PU’s.
Tthe foot section can be adjusted by means of a spring gas.
Four 100 mm diameter double castors with multifunction pedal, located at the footboard, for centralised braking.
Headboard and footboard bolted to the frame.

Technical information

Total length with headboard and footboard	204 cm ± 1 cm.
Total width with rails	102 cm ± 1 cm.
Minimum / Intermediate / maximum height (without mattress)	23'5 / 43'5 / 83'5 cm ± 1 cm.
Backrest tilting angle	70º ± 5º
Legrest tilting angle	32º ± 2º
Trendelemburg / Antitrendelemburg	15º / 16º ± 2º
Safe working load (SWL)	270 kg.

Options

Short telescopic side rail for footrest.
Extendable bed base until 20 cm.
Footboard closure.
Variety of headboard / footboard.
125 mm. metallic wheels.
Removable ABS panels for bed base.
Beb base wihout extension.
Battery
Under bed light
"H/V" bumpers
"H" bumpers.
Wired nurse control with locking + wired patient control.
I-V Pole with 2 or 4 hooks.
Trapeze bar.
Tilting table.
Oxigen cylinder holder.

100% revised

An essential pillar in PARDO is the product wide range and quality offered to our customers. All beds produced in our facilities are thoroughly tested by our staff and by a PARDO designed quality control machinery, where product functions and quality are controlled.

Several tests are done both internally and by external accredited agencies. All models are subjected to strict life testing procedures, which are widely overtaken, what ensure the current standards compliance in order to certify the beds.

External audit from ENAC accredited and notified agencies are made to endorse our quality system, environmental management and sanitary product.

Custom product

When we talk about customizable product, we refer to each hospital or nursing home can change, include or remove the specifications and features of our furniture to fully suit its installation and the needs of the user and staff, making then an exclusive and different product. Customizations you can make to our hospital armchairs are specified in the options section.

To do this, Industrias Hidráulicas Pardo has a complete R&D team that is responsible at all times to offer the best solution that suit to each installation.

Data sheet

documentacion_bora.pdf

Use and maintenance

pco748207_ficharapida_borakala_en_2020_rev01.pdf

Certificate

declaracionue_bora_septiembre2023.pdf

Bora Kala

Tab verticales

We advise you

without obligation